Articles in "1020 Trim Saw TS-1021 - Current"

Troubleshooting Any Problem

A Systematic Approach to Troubleshooting All machinery, no matter how well made, will from time to time need to be repaired. Downtime can be very expensive, not only the cost of the repair but also the cost of lost production. Some technicians use the sh

Air Fitting Part Number Lists with Photos

Open Attachment for List. File Attachments can be found to the right and below. ​ The attached documents are lists of Norfield part numbers for the air fittings that we use on our machines. There is one list for the one touch (plastic)fittings and anot

Pnuematic Components Explained

The inner workings of cylinders and valves are largely misunderstood. This is because what goes on inside of them can not be seen. The attached documents will explain the basics of the inner workings of common pneumatic components. File Attachments can

Daily, Weekly, Monthly Maintenance Checklist 1020

Open Attachment for Checklist. File Attachments can be found to the right and below.

Switch Replacement Chart 1020

If your machine has a serial number of TS-1886 - TS-1903, then it was built with the Allen Bradley 800-E series switches, or the SS brand switches, on the control panel. Unfortunately these switches are no longer available from the manufacturer. These swi

Timing and Adjustment for 1020

Model 1020 Double End Trim Saw Timing and Adjustment Open the attachment for a printable copy. File Attachments can be found to the right and below. ​ Set saw length between 20 30 inches, set turntables to 90 degrees, turn off and lock out the air. D

Saw Drive Cylinder Replacement

1020 SAW DRIVE CYLINDER REPLACEMENT Turn off the disconnect switch and lock out and tag out. Reset the main air lever and cycle start lever to the off position. Turn the air valve located on the FRL unit to the off position and lock and tag out. Lift the

Preinstallation Data Sheet - 1020 Trim Saw

Open Attachment for the data sheet. File Attachments can be found to the right and below.